...
3D Printed Stretch Sense Mount for Studio Gloves | Wrist Straps | AMVR Palm Straps | |
|---|---|---|---|
Comfort | ⭐ | ⭐ ⭐ ⭐ | ⭐ ⭐ |
Precision | ⭐ ⭐ ⭐ | ⭐ | ⭐ ⭐ |
Mounting | .jpeg?version=1&modificationDate=1728526000323&cacheVersion=1&api=v2&width=236) | .jpeg?version=1&modificationDate=1728526230375&cacheVersion=1&api=v2&width=236) | .jpeg?version=1&modificationDate=1728526247279&cacheVersion=1&api=v2&width=236) |
App tracker mount preset |  |  |  |
Usage Notes | Use for best hand position accuracy for basic SteamVR content at the expense of comfort. Remove the 1/4” screw baseplate and clip directly to the 3D printed mount. Attach hair ties or rubber bands to loop around hooks to stabilize wobbling - you may need to choose the correct band length to avoid straining the connectors of the glove electronics module. Use foam tape under the mount to increase comfort. | Position is compatible with most VR straps but will not track wrist bend. We recommend AMVR wrist straps or Rebuff Reality track straps. Use the 1/4” screw baseplate to mount. | Use for best hand position accuracy for high-energy SteamVR games with lots of movement. Has the best overall comfort balanced with hand position accuracy. Use the 1/4” screw baseplate to mount. |
| Tip |
|---|
Steam must be installed in the default location (e.g. |
| Note |
|---|
Changes are coming in a newer StretchSense App for SteamVR release that will contain offset presets for the VIVE Ultimate Tracker when attached via wrist strap or an experimental 3D printed mount by StretchSense.   |
2. Ultimate Tracker PCVR Setup
...
Changelog | Version | Publish Date (YYYY/MM/DD) |
|---|---|---|
Add rating and mount preset labels for each supported Ultimate Tracker mount. | v1.0.1 | 2024/10/11 |
Initial version. | v1.0.0 | 2024/10/10 |
...