Tracker Mounting Guide

This guide covers mounting Vive 3.0, Tundra, Ultimate Trackers and Mocopi trackers to the StretchSense Studio Gloves. It has links to where you can obtain compatible mounts and the necessary required materials to make each attachment, as well as the mounting process.

We recommend using a third-party wrist strap to attach heavier trackers like the VIVE Ultimate Tracker. This helps to reduce the strain on the top electronics module while attached to the StretchSense Studio Gloves.

Calibrate the gloves with the tracker attached for best results.

Mount Name	Tracker	Description	STL Download	Other Materials
Universal Mount for Studio Glove	Vive Tracker 3.0	StretchSense Studio Glove universal mount (available to select when ordering Studio Glove from StretchSense website). Attach Vive Tracker with 1/4” screw.	N/A	1/4” D-Ring Screw
Lenrui’s Vive Tracker 3.0 Mount for Studio Glove	VIVE Tracker 3.0	Community-made mount by Lenrui from StretchSense Discord. Not recommended for SteamVR games with high activity - use the AMVR palm straps instead.		1/4” D-Ring Screw
AMVR Palm Straps	VIVE Tracker 3.0	Attach Ultimate Tracker using included Tundra baseplate with 1/4” screw. Make Vive 3.0 Tracker align horizontally along the strap with the LED facing your thumb.	N/A	https://www.amazon.com/Tracker-Adjustable-Tracking-Trackers-Wristband-NO/dp/B07S58VWP6 AMVR Palm Straps
Universal Mount for Studio Glove	Tundra Tracker	StretchSense Studio Glove universal mount (available to select when ordering Studio Glove from StretchSense website). Attach Tundra Tracker using included Tundra baseplate with 1/4” screw.	N/A	1/4” D-Ring Screw
	Tundra Tracker	StretchSense Studio Glove universal mount (available to select when ordering Studio Glove from StretchSense website). Attach this mount to it by sliding it over the universal mount. Attach Tundra tracker by detaching the original base and screwing it to the 3D printed mount using the PH000 screws from the Tundra base.		https://www.amazon.com/Wera-05345290001-Screwdriver-Electronic-Applications/dp/B00LCHYO8E PH000 Screwdriver StretchSense Studio Glove Universal Mount
Lenrui’s Vertical Tundra Tracker Mount for Studio Glove	Tundra Tracker	Community-made mount by Lenrui from StretchSense Discord. Attach Tundra tracker by detaching the original base and screwing it to the 3D printed mount using the PH000 screws from the Tundra base.	Print vertically with supports to improve stability	https://www.amazon.com/Wera-05345290001-Screwdriver-Electronic-Applications/dp/B00LCHYO8E PH000 Screwdriver
SlimeVR Tracker Baseplate	SlimeVR	Community-made mount by Snax from StretchSense Discord. Attach SlimeVR trackers by opening the original slime case and replacing the back panel with the 3D printed part.	SlimeVR Backplate for StretchSense Mounting Clip \| SlimeVR_Mount_1	Official SlimeVR case Official SlimeVR case screws
Ultimate Tracker Low-Profile Mount for Studio Glove	Ultimate Tracker	Experimental Ultimate Tracker mount by StretchSense. Print in PLA with supports vertically on diagonal angle to improve structure. Supports must be removed cleanly using cutting pliers. Attach hair ties around thumb to stabilize while attached to glove and to reduce strain on the mount and Studio Glove electronics module.		Cutting pliers Rubber bands or hair ties
AMVR Palm Straps	Ultimate Tracker	Attach Ultimate Tracker using included Tundra baseplate with 1/4” screw. Make Ultimate Tracker align horizontally along the strap with the LED facing your chest when your arms are outstretched.	N/A	https://www.amazon.com/Tracker-Adjustable-Tracking-Trackers-Wristband-NO/dp/B07S58VWP6 AMVR Palm Straps
Mocopi Mount	mocopi left / right trackers	Using the T6 screwdriver, unscrew the T6 screws from the left and right mocopi wrist straps to release the magnetic base of the mount. Clip the 3D printed mount in between the two sides of the magnetic base and screw the T6 screws back in. Don’t over tighten and be careful not to strip the screws. You must wear the other trackers in the correct position and calibrate using SlimeVR server connected to the mocopi app.	You may need to file and cleanup the 3D print to get the magnetic base to fit correctly.	https://www.amazon.com/Wera-05118181001-Kraftform-Electronics-Screwdriver/dp/B003ES5M4O?ref_=ast_sto_dp&th=1 T5 Screwdriver